文档列表
Adhesive Strength of CVD Diamond Film to WC- Co Substrate5p.- Ar- H2 microwave plasma was used to etch the substrates, which could change the interface structure between diamond films and substrates and improve the adhesive strength.
- 000panmeirong 发布于3346天之前
- Comacting Die with Nanometer Diamond Composite Coating4p.
- This paper presents the principle of the formation of diamond coating by the chemical vapour deposition (CVD ) method and manufacture of coated dies.
- 000panmeirong 发布于3348天之前
- Hydraulic Turbines to Cavitation Erosion and Abrasion5p.
- WC- M hard- faced ceramic coating was made on the substrate of steel by means of high velocity oxygen- fuel flame ( HVO F) thermal spraying.
- 000panmeirong 发布于3352天之前
- Mechanical Properties of WC-Co Coating4p.
- High velocity oxyg-fuel ( HVOF) technology is used to spray WC - Co alloy and to forma resistance coating on stainless steel.
- 000panmeirong 发布于3352天之前
- Laser Cladding NiCrBSi- WC Coating on Copper Substrate4p.
- The NiCrBSi coating was carried out on copper surface by ten thousand- watt laser cladding process. After that the microstructure and properties were studied.
- 000panmeirong 发布于3352天之前
- Wear Resistance of Laser Cladding NiCrWB Alloy Coating6p.
- NiCrWB cladding layer was prepared by high energy density laser- remelting of NiCrWB spraying layer from high velocity air fuel spray (HVAFS).
- 000panmeirong 发布于3353天之前
- Microstructure of Laser-clad NiCrBSi-TiC Coating4p.
- The clad coating of NiCrBSi-TiC metal ceramic powders on t he surface of TC4 alloy was performed by CO2 laser. By means of SEM and XRD , microstructure of t he coating was investigated , and microhardness was measured.
- 000panmeirong 发布于3353天之前
- Performance of Tungsten Carbide-Based Coatings5p.
- The processing of oil sand and heavy oil deposits is a highly aggressive environment. The combination of abrasive sands and corrosive media can lead to shortened and unpredictable component lives.
- 000panmeirong 发布于3353天之前
- Research Progress and Prospect of WC-Co Composite Coatings6p.
- Research progress and prospect of WC-Co composite coatings prepared by thermal spraying are reviewed in the present paper.
- 000panmeirong 发布于3353天之前
- Wear Resistance of Laser Cladding Ni-WC Coating5p.
- A plasma sprayed Ni-WC coating was cladded on the ZA 111 alloy surface by a 5kW CO2 laser.
- 000panmeirong 发布于3354天之前
- Properties of Ni WC Gradient Composite Coating5p.
- Ni-WC gradient composite coating was produced by broad beam laser cladding on a 40Cr steel substrate with self gravity pow der feed technique.
- 000panmeirong 发布于3354天之前
- Fracture Toughness of Nickel Based Nano- WC/ Co Composite3p.
- The fracture toughness Kc of Ni- based nano- WC/ Co composite coating on the surface of 45 steel by laser clad was researched.
- 000panmeirong 发布于3354天之前
- Corrosion Resistance of Laser-clad Ni-coated WC Composite4p.
- A 45 steel substrate was strengthened by laser cladding Ni-coated WC cermet coating. The microstructure and phase composition of the laser-clad Ni-coated WC metal cermet coating were analyzed,
- 000panmeirong 发布于3354天之前
- Microstructure and Properties of Ni/WC Composite Coating4p.
- Ni/ WC composite coatings were prepared on A3 steel by laser cladding. The morphology and distribution of WC particles under t he different laser power and t heir influences on t he wear resistance properties were studied.
- 000panmeirong 发布于3354天之前
- Laser Cladding Cr3C2/Co Alloy Composite Coating5p.
- Laser cladding Cobalt-based alloy coating (Co60) and Cobalt-based composite coating doped w ith 40% Cr3C2 particles (Cr3C2/Co) were prepared on the low carbon steel substrate by 5 kW CO2 laser. Microstructures of the coatings were analyzed.
- 000panmeirong 发布于3354天之前
Copyrights ? 2013-2022 i.chinatungsten.com 中钨在线文库网
Email:info@chinatungsten.com 闽ICP备05002525号-1 知识产权声明
Email:info@chinatungsten.com 闽ICP备05002525号-1 知识产权声明