文档列表
Microstructure and Performance of Laser Cladding SiC/Co Coat4p.- The SiC/Co composite coating was prepared on 45 steel substrate by laser cladding. The coatings microstructure, friction and wear properties were examined.
- 000panmeirong 发布于3242天之前
- Aging Behavior of Rapidly Solidified SiCp/Al Composites7p.
- The aging behaviors of SiC particles reinforced Aluminum matrix composites manufactured by powder metallurgy technology, were studied.
- 400panmeirong 发布于3249天之前
- SiC Surface on Performance of Ni/SiC Methanation Catalyst11p.
- Ni/SiC methanation catalysts were prepared by an incipient wetness impregnation method. Effects of the oxidation extent of the SiC surface onl ow‐temperature activity and high‐temperature stability of the catalysts were investigated.
- 100panmeirong 发布于3251天之前
- Preparation of a High Property C/C-SiC Composite5p.
- C/C-SiC composites were prepared via chemical vapor deposition (CVD), siliconizing,resin impregnation and carbonization densification and grap hitization. The microst ructure of the composite was observed by using polarized light optical microscopy (PLOM), scanning electron microscopy (SEM).
- 000panmeirong 发布于3251天之前
- Mechanical Properties of SiCw/ZTA(Y) Ceramic Composites5p.
- The influence of sic whisker volume content on the mechnical properties of the SiCw/ZTA (Y) composites is studied.
- 000panmeirong 发布于3251天之前
- Properties of KD-I/SiC Composites4p.
- Using KD-I type SiC fiber as the reinforcement, the KD-1/SiC composites were fabricated by precursor infiltration and Pyrolysis (PIP) technique.
- 000panmeirong 发布于3251天之前
- Evaluating Mechanical Properties of SiC Hard Coating6p.
- To solve difficulties of mechanical properties test of SiC hard coating, depth-sensing indentation method was used to evaluate the hardness and elastic modulus of SiC hard coatings. Common glass and stainless steel are adopted in this test for comparing and to understand the reliability.
- 000panmeirong 发布于3252天之前
- Composition and Structure on Specific Resistivity of SiC7p.
- Four kinds of SiC fibers with different specific resistivities were prepared by the pyrolysis of cured polycarbosilane fiber.
- 000panmeirong 发布于3252天之前
- Self-catalytic Synthesis of β-SiC Nanowires5p.
- Straight and long β-SiC nanowires were synthesized in direct current arc discharge using a mixture of graphite, silicon, and silicon dioxide as the precursor.
- 000panmeirong 发布于3252天之前
- 用于太阳能储热的粘土结合SiC复相陶瓷结构分析4p.
- The SiC -kaolinite composite ceramic was prepared by using SiC, kaolinite and Suzhou clay as raw material. The sintered samples were measured.
- 000panmeirong 发布于3252天之前
- Properties of SiC Porous Ceramics by Polycarbosilane4p.
- Effect of the submicron SiC micro powder addition on the microstructure, linear shrinkage, porosity and flexural strength were investigated.
- 000panmeirong 发布于3253天之前
- Resin Impregnation Pyrolysis Times on C/SiC Brake Material4p.
- The effect of resin impregnation cycles on the microstructure characteristics of C/C composites and C/SiC composites are investigated.
- 000panmeirong 发布于3257天之前
- Microstructure of Al2O3/SiC Nano-composite Ceramics5p.
- In order to improve the thermal-shock resistance of alumina ceramics, nano SiC powder with high heat conductivity and low thermal-expansion coefficient w as added into Al2O3 matrix.
- 000panmeirong 发布于3257天之前
- Microstructure and Mechanical Properties of ZrC-SiC-Cg4p.
- Effect of the graphite and its content on the microstructure and mechanical properties of the fabricated ceramic materials were investigated.
- 000panmeirong 发布于3257天之前
- Heat Treatment on Friction and Abrasiveness of SiC/Al4p.
- SiC/Al composite were prepared by hot pressing, variations in friction and wear were studied related to heat treatment.
- 000panmeirong 发布于3257天之前
Copyrights ? 2013-2022 i.chinatungsten.com 中钨在线文库网
Email:info@chinatungsten.com 闽ICP备05002525号-1
知识产权声明
Email:info@chinatungsten.com 闽ICP备05002525号-1
知识产权声明