文档列表
Chemical Modification of Ultra fined Diamond Particles4p.- Chemical Modification of Ultra fined Diamond Particles and their tribiological properties are introduced.
- 000panmeirong 发布于3220天之前
- Structure Transition Characteristics of Nanometer WC/ Ni60B2p.
- The Ni matrix composite coatings were made with preferred laser cladding processing paramet er on 45 st eel samples, which were strengthened by agglomerated micro- grain WC part icles and agglomerat ed nano- grain WC particles.
- 000panmeirong 发布于3226天之前
- Properties of ( 1. 2%Zr 40%WC)/FeCSiBRE Layer5p.
- The morphologies ,microstructures ,interface structure and t he distribution of t he WC particles in t he clad layers were observed.
- 000panmeirong 发布于3226天之前
- WC Particles-High-Chrome Cast Iron4p.
- To improve the wear-resistance of farm tools, the surface composites with WC particles-high-chrome cast iron were achieved on cast iron by cast-in-place surface alloying,and the abrasive behavior of the composites was studied using a MM-200 wear tester.
- 000panmeirong 发布于3231天之前
- Simulation of Radioprotection from Energeitc α Particles4p.
- In this paper,using Monte Carlo method we have simulated high-energy alpha particles’ interaction with different materials like aluminum, polyethylene, water, and liquid hydrogen.
- 000panmeirong 发布于3242天之前
- Aging Behavior of Rapidly Solidified SiCp/Al Composites7p.
- The aging behaviors of SiC particles reinforced Aluminum matrix composites manufactured by powder metallurgy technology, were studied.
- 400panmeirong 发布于3249天之前
- Preparation of SiC Nano-Particles4p.
- Magnesium matrix composites reinforced with SiC nano particles(n-SiCp/AZ91D)were fabricated by high intensity ultrasonic.The ultrasonic effects and ultrasonic mechanisms of particles/melts were discussed.
- 000panmeirong 发布于3259天之前
- Carbon Nanotubes/Epoxy Resin Composites with SiC Particle4p.
- Epoxy resin composites with carbon nanotubes and SiC particles as the absorber were prepared, and their absorption properties were tested.
- 000panmeirong 发布于3259天之前
- Nanocomposite Aeramic Coating of Al2O3 13%wt.TiO24p.
- The microstructure of laser-remelting nano-SiC composite ceramic coatings has been investigated using X-ray diffraction and scanning electronmicroscopy.
- 000panmeirong 发布于3259天之前
- Sheet Forming of Spray Deposition Al-Fe-V-Si Alloy5p.
- The spray deposited preforms rolled after extruding were comparatively investigated.
- 000panmeirong 发布于3259天之前
- Preparation and Properties of Surface Composite Layer4p.
- Nano SiC ceramic particles and aluminum powders reinforced surface composite layer is prepared on the surface of magnesium alloy AZ31 by pulse current gas tungsten arc (GTA) processing.
- 000panmeirong 发布于3260天之前
- Mixtures of Diamond and SiC Particles6p.
- The thermal conductivity of diamond hybrid SiC/Cu, diamond/Cu and SiC/Cu composite were calculated by using the extended differential effective medium (DEM) theoretical model in this paper.
- 000panmeirong 发布于3260天之前
- Distribution Uniformity of SiC Particles in Aluminium Alloy4p.
- The effects of process factors on t he distribution uniformity SiC particles in 6061 aluminium alloy composites by stirring casting have been investigated by the method of microstructure analysis.
- 000panmeirong 发布于3261天之前
- Properties of SiC Reinforced Aluminum-Based Composite10p.
- The effect of SiC particles reinforcement with average size of 1, 5, 20 and 50 μm and volume fraction of 5%, 10% and 15% on the microstructure and tribological properties of Al-based composite was investigated.
- 000panmeirong 发布于3264天之前
- Mechanical Properties of Mg-Gd-Y-Nd/SiCP Composite6p.
- The microstructure and mechanical properties of Mg-Gd-Y-Nd/SiCP composite fabricated by stirring casting and vacuum re-melting were investigated by OM, SEM, EDS and tensile test.
- 000panmeirong 发布于3265天之前
Copyrights ? 2013-2022 i.chinatungsten.com 中钨在线文库网
Email:info@chinatungsten.com 闽ICP备05002525号-1
知识产权声明
Email:info@chinatungsten.com 闽ICP备05002525号-1
知识产权声明